>Mounting:Diffuse reflection sensor
>Rated distance :30cm
>Supply voltage :10-30VDC
>Output:NPN NO/NC or PNP NO/NC
>Spot diameter:13mm@30cm
>Degree of protection:IP67
>Response time:T-on≤1ms,T-off≤1ms
NPN | NO/NC | PSEP-BC30DNBR | PSEP-BC30DNBR-E3 |
PNP | NO/NC | PSEP-BC30DPBR | PSEP-BC30DPBR-E3 |
Detection type | Diffuse reflection |
Rated distance | 30cm |
Output | NPN NOINC Or PNP NO/NC |
Spot diameter | 13mm@30cm |
Response time | T-on≤1ms,T-off≤1ms |
Supply voltage | 10..30 VDC |
Consumption curent | ≤12mA |
Load curent | ≤100mA |
Hysteresis range | 3...20% |
Voltage drop | ≤1.5V |
Light source | Red light (640nm) |
Circuit protection | Short-circuit, overload, reverse polarity and zener protection |
NO/NC adjustment | Drive-by-wire |
Distance adjustment | Adjusting tap |
Indicator | Green light: power, stable signal (unstable signal flash) |
Yellow light: output, overload or short circuit (flash) | |
Anti-ambient light | Anti-sunlight interference ≤ 10,000lux; |
Incandescent light interference ≤ 3,000lux | |
Operating temperature | -25°C...55 °C(no condensation) |
Storage temperature | -25℃C...70°C |
Protection degree | IP67 |
Production standard | EN60947-5-2:2012、IEC60947-5-2:2012 |
Material | Housing:PC+ABS; Filter: PMMA |
Weight | 50g/10g |
Connection | 2m PVC cable/M8 4-pin connector |
Accessories | Screwsx2、Mounting bracket ZJP-8 |
CX-442、CX-442-P-Z、CX-444-P-Z、E3Z-LS81、GTB6-P1231 HT5.1/4X-M8、PZ-G102N、ZD-L40N