Throgh beam photoelectric sensor PST-TM2 series is microsquare photoelectric sensor。
It sensing distance 2m,output NPN/PNP NO、NC,2m PVC cable;20cm PVC+M8 connector(3-pins)
> Through beam photoelectric sensor
> Sensing distance: 2m;
>Light spot size:10mm@2m
>Load curren:≤50mA
>Voltage drop:≤1.5V
>Light source:Red Vcsel light(680nm)
>Supply voltage:10...30VDC
> Output: NPN,PNP,NO/NC
> Protection degree: IP65
> CE certified
> Complete circuit protection: short-circuit, reverse polarity and overload protection
> Accessory:Screws(M3*16mm)*2、Nut*2、Operation manual
| Emitter | Receiver | Emitter | Receiver | ||
| NPN | NO | PST-TM2DV | PST-TM2DNOR | PST-TM2DV-F3 | PST-TM2DNOR-F3 |
| NPN | NC | PST-TM2DV | PST-TM2DNCR | PST-TM2DV-F3 | PST-TM2DNCR-F3 |
| PNP | NO | PST-TM2DV | PST-TM2DPOR | PST-TM2DV-F3 | PST-TM2DPOR-F3 |
| PNP | NC | PST-TM2DV | PST-TM2DPCR | PST-TM2DV-F3 | PST-TM2DPCR-F3 |
| Detection type | Through beam |
| Sensing distance | 2m |
| Standard target | φ5mm above opaque objects |
| Min target | φ4mmabove opaque objects① |
| Direction angle | Emitter:±1°;Receiver:±4. ° |
| Spot size | 10mm@2m |
| Supply voltage | 10...30VDC |
| Consumption current | Emitter:≤5mA;Receiver:≤15mA |
| Load current | ≤50mA |
| Voltage drop | ≤1.5V |
| Light source | Red Vcsel(680nm) |
| Indicator | Green:power supply indicator,stability indication;Yellow:output indication |
| Protection circuit | Short circuit,reverse polarity,overload protection |
| Response time | T-on<1ms ,T-off<1ms |
| Anti ambient light | Sunlight interference ≤10,000 lux;Incandescent light interference ≤3,000 lux |
| Operation temperature | -10...45 ºc(No condensation、No icing) |
| Storage temperature | -30...70 ºC(No condensation、No icing) |
| Protection degree | IP65 |
| Shell material | ABS |
| Lens | PMMA |
| Connection | 2m PVC cable |
| Accessory | Screws(M3×16mm)×2、Nut×2、Operation manual |
CX-442、CX-442-P-Z、CX-444-P-Z、E3Z-LS81、GTB6-P1231 HT5.1/4X-M8、PZ-G102N、ZD-L40N