LANBAO KN01M series DC 24V Switch value input/Switch value output Isolate safety barrier
Transmit active or passive switching signals from dangerous areas to safe areas through barriers. The output mode is relay or collector output mode, and the forward and reverse effects can be selected at the same time.
| Model | Explanation | |||
| KN01M | x | x | x | Switch value input, output |
| Channel | S | Signal | ||
| D | Dual | |||
| Input | C | Passive switch input | ||
| S | Proximity switch input（8.2V supply） | |||
| Output | J | Relay output | ||
| N | Transistor collector output | |||
| Transmit accuracy | ±0.2%×F.S |
| Danger area | Passive input signal is pure switch contact. |
| Allowable input signal | Active signal: Sn = 0 , Current< 0 . 2mA; Sn is infinite,current< 3mA ; Sn is max.sensing distance,current is 1.0-1.2mA |
| Safety area output signal |
Relay NC( NO) contact point output, allow( Resistive) load: AC125V 0.5A,DC60V 0.3A,DC30V 1A Open collector output: Passive,outer supply：< 40V DC , switch frequency≤ 5kHz . Current output≤ 60mA ， short circuit current< 100mA . |
| Applicable | Proximity switch,active and passive switches, dry contact (intrinsically safe pressure switch |
| Power supply | DC 24V±10% |
| Power consumption | 2W |
| Housing size | W× H× D( 22 . 6 * 100 . 3 * 113 . 3 ) mm |
Write your message here and send it to us
