Through-beam reflection sensors serve to detect objects reliably, regardless of surface, color, material - even with a heavy gloss finish. They consist of separate transmitter and receiver units that are attuned to each other. When an object interrupts the light beam, this causes a change in the output signal in the receiver.
> Through Beam Reflective
> Sensing distance: 20m
> Housing size: 35*31*15mm
> Material: Housing: ABS; Filter: PMMA
> Output: NPN,PNP,NO/NC
> Connection: 2m cable or M12 4 pin connector
> Protection degree: IP67
> CE certified
> Complete circuit protection: short-circuit, reverse polarity and overload protection
|
Through Beam Reflective |
||
|
|
PSR-TM20D |
PSR-TM20D-E2 |
|
NPN NO/NC |
PSR-TM20DNB |
PSR-TM20DNB-E2 |
|
PNP NO/NC |
PSR-TM20DPB |
PSR-TM20DPB-E2 |
|
Technical specifications |
||
| Detection type |
Through Beam Reflective |
|
| Rated distance [Sn] |
0.3…20m |
|
| Direction angle |
>4° |
|
| Standard target |
>Φ15mm opaque object |
|
| Response time |
<1ms |
|
| Hysteresis |
<5% |
|
| Light source |
Infrared LED (850nm) |
|
| Dimensions |
35*31*15mm |
|
| Output |
PNP, NPN NO/NC (depends on part No.) |
|
| Supply voltage |
10…30 VDC |
|
| Residual voltage |
≤1V (Receiver) |
|
| Load current |
≤100mA |
|
| Consumption current |
≤15mA (Emitter), ≤18mA (Receiver) |
|
| Circuit protection |
Short-circuit, overload and reverse polarity |
|
| Indicator |
Green light: power indicator; Yellow light: output indication, short circuit or |
|
| Ambient temperature |
-15℃…+60℃ |
|
| Ambient humidity |
35-95%RH (non-condensing) |
|
| Voltage withstand |
1000V/AC 50/60Hz 60s |
|
| Insulation resistance |
≥50MΩ(500VDC) |
|
| Vibration resistance |
10…50Hz (0.5mm) |
|
| Degree of protection |
IP67 |
|
| Housing material |
Housing: ABS; Lens: PMMA |
|
| Connection type |
2m PVC cable |
M12 connector |