Inzwa encane yokufuduka kwe-laser yedijithali engu-12V 24V DC RS485 yochungechunge lwe-PDE-CR400 enembile kakhulu
>Ibanga eliphakathi nendawo：400mm
>Ububanzi bokulinganisa: 200mm
>Isikali esigcwele (FS): 200-600mm
>Ubukhulu: 45mm*27mm*21mm
>I-voltage yokunikezela：12...24VDC
>Amandla okusebenzisa: ≤960mW
>Isixazululo: 100μm
>Ukunemba okuqondile: ± 0.2% FS (ibanga lokulinganisa 200mm-400mm);
± 0.3%FS (ibanga lokulinganisa 400mm-600mm)
>± Ukunemba okuphindayo: 300μm@200mm-400mm; 800μm@400mm(Faka)-600mm
>Isikhathi sokuphendula:<10ms
| I-RS-485 | I-PDE-CR400TGR |
| 4...20mA + 0-5V | I-PDE-CR400TGIU |
| Ibanga eliphakathi nendawo | 400mm |
| Ububanzi bokulinganisa | ±200mm |
| Isikali esigcwele (FS) | 200-600mm |
| I-voltage yokunikezela | 12...24VDC |
| Amandla okusebenzisa | ≤960mW |
| Layisha okwamanje | ≤100mA |
| Ukwehla kwamandla kagesi | <2V |
| Umthombo wokukhanya | I-laser ebomvu (650nm); Izinga le-laser: Isigaba 2 |
| Ububanzi bomsebe | Cishe i-Φ500μm (ku-400mm) |
| Isixazululo | 100μm |
| Ukunemba okuqondile | ±0.2%FS (ibanga lokulinganisa 200mm-400mm) ；±0.3%FS (ibanga lokulinganisa 400mm-600mm) |
| Ukunemba okuphindayo | 300μm@200mm-400mm；800μm@400mm(Faka)-600mm |
| Umphumela 1 (Ukukhethwa kwemodeli) | Inani ledijithali: RS-485 (Iphrothokholi yokusekela ye-Modbus) ； Inani lokushintsha: NPN/PNP kanye ne-NO/NC elungisekayo |
| Umphumela 2 (Ukukhethwa kwemodeli) | I-Analog: 4...20mA (Ukumelana nomthwalo ＜300Ω)/0-5V; Inani lokushintsha: NPN/PNP kanye ne-NO/NC elungisekayo |
| Ukusetha ibanga | I-RS-485: Ukusetha ukucindezela inkinobho/i-RS-485; I-Analog: Ukusetha ukucindezela inkinobho |
| Isikhathi sokuphendula | <10ms |
| Ubukhulu | 45mm*27mm*21mm |
| Isibonisi | Isibonisi se-OLED (Usayizi: 18 * 10mm) |
| Ukukhukhuleka kwezinga lokushisa | ＜0.03%FS/℃ |
| Isikhombisi | Isikhombisi sokusebenza se-laser: ukukhanya okuluhlaza kuvuliwe; Isikhombisi sokukhipha iswishi: ukukhanya okuphuzi |
| Isekethe yokuvikela | Ukuvikelwa kwesekethe esifushane, ukuvikelwa kwe-polarity engemuva, ukuvikelwa kokulayisha ngokweqile |
| Umsebenzi owakhelwe ngaphakathi | Izilungiselelo zekheli lesigqila kanye nezinga le-Baud; Ukusethwa kwe-zero ； Umbuzo wepharamitha; Ukuzihlola komkhiqizo; Ukusethwa kokukhipha; Ukufundisa ngamaphuzu angama-Ingle/ukufundisa ngamaphuzu amabili/ukufundisa ngamaphuzu amathathu; Ukufundisa ngefasitela; Ukusetha kabusha idatha yefektri |
| Indawo yesevisi | Izinga lokushisa lokusebenza: -10…+45℃; Izinga lokushisa lokugcina: -20…+60℃; Izinga lokushisa eliphakathi: 35…85%RH (Akukho ukujiya) |
| Ukukhanya okulwa ne-ambient | Ukukhanya kwe-Incandescent: ＜3,000lux; Ukuphazamiseka kokukhanya kwelanga: ≤10,000lux |
| Izinga lokuvikela | I-IP65 |
| Izinto | Indlu: I-alloy ye-Zinc; Ilensi: PMMA; I-Diaplay: Ingilazi |
| Ukumelana nokudlidliza | 10...55Hz Ububanzi obuphindwe kabili obungu-1mm, 2H ngayinye eziqondisweni ze-X, Y, Z |
| Ukumelana nomfutho | 500m/s²(Cishe 50G)Izikhathi ezintathu ngayinye eziqondisweni ze-X, Y, Z |
| Uxhumano | Ikhebula elihlanganisiwe elingu-2m (0.2mm²) |
| Isesekeli | Isikulufu se-M4 (ubude: 35mm) x2, amantongomane x2, i-gasket x2, i-bracket yokufaka, incwadi yokusebenza |
Bhala umlayezo wakho lapha bese uwuthumela kithi
