Bolulo ba Tšepe bo Bohlale RS485 4 ho isa ho 20mA PDA-CC10DGR CMOS Sensor e Bohlale e Lekanyang Sebaka sa Laser

Tlhaloso e Khutšoanyane:

Mabone a manyane a laser, phapang e ntle ea 'mala oa botšo le bosoeu, boholo bo fapaneng ba mabone, a sebetsana habonolo le lipheo tse fapaneng.
Mokhoa o feto-fetohang oa tlhahiso: Sesebelisoa sa ho bulela switch se hahiloeng kahare (NPN/PNP/PULL-PUSH)+analog 4…20mA kapa RS-485,
Ho tšehetsa protocol ea MODBUS, ha ho hlokahale molaoli, mosebetsi o ikemetseng, ho hokahanngoa habonolo ho PLC kapa IPC. Ts'ebetso e matla ea ts'ebetso e kenyelletsa likhetho tse ngata tsa mefuta ea ho lekanya le ho nepahala, mekhoa le li-filters tse fapaneng li ka beoa, ka ntlha e le 'ngoe, thuto ea fensetere, ntlha e le 'ngoe, thuto ea fensetere, mesebetsi e kang litlhophiso tsa 'mapa oa analog li netefatsa sebaka le tlhahlobo ea ts'ebetso e tsitsitseng le e tenyetsehang.
Mohlala o bolelele bo fihlang ho 1,000 mm, le qeto e tlase ho fihla ho 5μm. Ntlo ea aluminium e bobebe, moralo oa ponahalo o bonolo, ts'ebetso e tsoetseng pele ea tekheniki, e tiileng le e tšoarellang; sehokelo sa cable sa oblique sa 45°, se loketse litlhoko tse ling tsa ho kenya.

Romella imeile ho rona

Qaqiso ea Sehlahisoa

Khoasolla

Li-tag tsa Sehlahisoa

Tlhaloso

Sensor ea laser ea CMOS e loketseng litekanyo tse bonolo, ho nepahala ho hoholo le ho nepahala ho tloaelehileng ha pontšo ea dijithale ea laser e lekanyang sebaka letoto la PDA. Bokhoni bo nepahetseng ba ho lemoha ka lebaka la algorithm e ikhethang, ho nepahala ho hoholo ha linearity ho fihlela ho lemoha ntle le ho ama ntle le ho senyeha. Litekanyo tse tsitsitseng bakeng sa mofuta ofe kapa ofe oa mosebetsi. Mefuta e fumaneha ka litlhaloso tse 'ne tse fapaneng tsa sebaka.
Pontšo ea dijithale ea OLED e kopantsoe hantle le senotlolo sa S le T habeli ho phaella moo, sehlahisoa se na le thuto e hahiloeng kahare, e ka behang mesebetsi eohle habonolo le ho khotsofatsa litlhoko tse fapaneng tsa ts'ebetso. Moralo o felletseng oa tšireletso o nolofalletsa sehlahisoa ho ba le ts'ebetso e ntle haholo ea ho thibela tšitiso le ho loketse maemo a rarahaneng a indasteri.

Likarolo tsa Sehlahisoa

> Ho lemoha tekanyo ea sebaka
> Sebaka sa ho lekanya: 30...100mm, 80...500mm, 150...1000mm
> Boholo ba ntlo: 65*51*23mm
> Tharollo: hlahloba lintlha tse qaqileng leqepheng la data
> Matla a tshebediso: ≤700mW
> Sehlahiswa: RS-485 (Tšehetso ea Modbus protocol); 4...20mA (Khanyetso ea mojaro ＜390Ω)/PUSH-PULL/NPN/PNP 'me NO/NC Settable
> Mocheso o tloaelehileng: -10…+50℃
> Thepa ea Bolulo: Bolulo: Aluminium; Sekoahelo sa lense: PMMA; Phanele ea ponts'o: PC
> Tšireletso e felletseng ea potoloho: Potoloho e khutšoanyane, polarity e khutlelang morao, tšireletso ea ho jara boima bo feteletseng
> Tekanyo ea tšireletso: IP67
> Leseli le thibelang tikoloho: Leseli le hlabang: ＜3,000lux
> Li-sensor li na le likhoele tse sirelelitsoeng, terata Q ke sesebelisoa sa ho bulela.

Nomoro ea Karolo

Matlo a polasetiki
	E tloaelehileng	Ho nepahala ho hoholo	E tloaelehileng	Ho nepahala ho hoholo	E tloaelehileng	Ho nepahala ho hoholo
RS485	PDA-CC10DGR	PDA-CC10DGRM	PDA-CC50DGR	PDA-CC50DGRM	PDA-CC100DGR	PDA-CC100DGRM
4...20mA	PDA-CC10TGI	PDA-CC10TGIM	PDA-CC50TGI	PDA-CC50TGIM	PDA-CC100TGI	PDA-CC100TGIM
Litlhaloso tsa tekheniki
Mofuta oa ho lemoha	Tekanyo ea sebaka
Sebaka sa ho lekanya	30...100mm		80...500mm		150...1000mm
Phepelo ea motlakase	RS-485:10...30VDC;4...20mA:12...24VDC
Matla a tšebeliso	≤700mW
Mojaro oa hona joale	200mA
Ho theoha ha motlakase	<2.5V
Mohloli oa leseli	Lese e khubelu (650nm); Boemo ba laser: Sehlopha sa 2
Sebaka se khanyang	1mm*3mm@100mm		Φ2.5mm@500mm		Φ3mm@1000mm
Qeto	5um@30mm;50um@100mm		15um@80mm;500um@500mm		50um@150mm;2000um@1000mm
Ho nepahala ha mola	RS-485:±0.3%FS;4...20mA:±0.4%FS	± 0.1%FS	RS-485:±0.3%FS;4...20mA:±0.4%FS	± 0.15%FS(80...250mm);± 0.3%FS(250...500mm)	± 0.6%FS	± 0.3%FS(150...450mm);± 0.6%FS(450...1000mm)
Ho nepahala ho pheta-pheta	10um@30mm;30um@50mm;100um@100mm	10um@30mm;30um@50mm;100um@100mm	30um@80mm;250um@250mm;1000um@500mm	30um@80mm;250um@250mm;1000um@500mm	100um@150mm;520um@500mm;4000um@1000mm	100um@150mm;520um@500mm;4000um@1000mm
Sehlahisoa sa 1	RS-485 (Tšehetso ea Modbus protocol); 4...20mA (Khanyetso ea mojaro ＜390Ω)
Sehlahisoa sa 2	PUSH-HULL/NPN/PNP 'me NO/NC e ka hlophisoa
Sebaka se behiloeng	RS-485:Setlhophiso sa ho tobetsa konopo/RS-485; 4...20mA:Setlhophiso sa ho tobetsa konopo
Nako ea karabelo	2ms/16ms/40ms E ka hlophisoa
Litekanyo	655123mm
Pontšo	Pontšo ea OLED (boholo: 14 * 10.7mm)
Ho thella ha mocheso	± 0.02%FS/℃
Sesupo	Sesupo sa matla: LED e tala; Sesupo sa ketso: LED e mosehla; Sesupo sa alamo: LED e mosehla
Potoloho ea tšireletso	Potoloho e khutšoanyane, polarity e khutlelang morao, tšireletso ea ho jara boima bo feteletseng
Mosebetsi o kentsweng kahare	Setlhophiso sa Aterese ea Lekhoba le Sekhahla sa Kou; Setlhophiso se tloaelehileng; Tlhahlobo ea sehlahisoa; Litlhophiso tsa 'mapa oa analoge; Setlhophiso sa tlhahiso; Khutlisa litlhophiso tsa fektheri; Ruta ntlha e le 'ngoe; Ruta fensetere; Potso ea liparamente
Tikoloho ea litšebeletso	Mocheso oa ts'ebetso: -10…+50℃; Mocheso oa polokelo: -20…+70℃
Mocheso o tloaelehileng	35...85%RH(Ha ho na condensation)
Leseli le thibelang tikoloho	Leseli la incandescent: ＜3,000lux
Tekanyo ea tšireletso	IP67
Thepa	Ntlo: Aluminium; Sekoahelo sa lense: PMMA; Phanele ea ponts'o: PC
Khanyetso ea ho thothomela	10...55Hz Bophahamo bo habeli 1mm, 2H ka 'ngoe ka litsela tsa X, Y, Z
Khanyetso ea tšusumetso	500m/s²(Hoo e ka bang 50G) makhetlo a 3 ka 'ngoe ka litsela tsa X, Y, Z
Mofuta oa khokahano	Thapo ea RS-485:2m ea li-pin tse 5 tsa PVC;4...20mA:2m Thapo ea PVC ea lipin tse 4
Sesebelisoa	Sekuru (M4×35mm)×2、Nat×2、Washer×2、Sebakete sa ho kenya、Buka ya tshebetso