La'ititi maualuga le sa'o 12V 24V DC RS485 masini fa'atekinolosi laser displacement series PDE-CR400
>Mamao o le ogatotonu：400mm
>Lautele o le fuaina：200mm
>Fua atoa (FS)：200-600mm
>Fua: 45mm * 27mm * 21mm
>Voltage sapalai：12...24VDC
>Mana fa'aaogāina: ≤960mW
>Iugafono: 100μm
>Sa'o sa'o: ±0.2% FS (mamao fua 200mm-400mm);
±0.3%FS (mamao fua 400mm-600mm)
>±Sa'o toe fai: 300μm@200mm-400mm; 800μm@400mm (Aofia ai) -600mm
>Taimi tali atu:<10ms
| RS-485 | PDE-CR400TGR |
| 4...20mA + 0-5V | PDE-CR400TGIU |
| Mamao i le ogatotonu | 400mm |
| Fuaina o le lautele | ±200mm |
| Fua atoa (FS) | 200-600mm |
| Voltage sapalai | 12...24VDC |
| Malosiaga fa'aaogā | ≤960mW |
| Tafe o le uta | ≤100mA |
| Pa'ū o le voltage | <2V |
| Puna o le malamalama | Leisa mumu (650nm); Tulaga leisa: Vasega 2 |
| Lapoa o le aufana | E tusa ma le Φ500μm (i le 400mm) |
| Iugafono | 100μm |
| Sa'o lelei o le laina | ±0.2%FS (mamao fua 200mm-400mm)；±0.3%FS (mamao fua 400mm-600mm) |
| Toe fai le sa'o | 300μm@200mm-400mm；800μm@400mm (E aofia ai)-600mm |
| Galuega Faatino 1 (Filifiliga o le faʻataʻitaʻiga) | Taua numera: RS-485 (Lagolagoina le Modbus protocol); Taua fesuiaʻi: NPN/PNP ma NO/NC e mafai ona setiina |
| Galuega Faatino 2 (Filifiliga o le faʻataʻitaʻiga) | Analog: 4...20mA (Tete'e i le avega <300Ω)/0-5V; Tau o le fesuia'iga: NPN/PNP ma le NO/NC e mafai ona setiina |
| Fa'atulagaina o le mamao | RS-485: Fa'atulagaga o le ki oomi/RS-485; Analog: Fa'atulagaga o le ki oomi |
| Taimi tali atu | <10ms |
| Fua | 45mm*27mm*21mm |
| Fa'aali | Fa'aaliga OLED (Tele: 18 * 10mm) |
| Fe'avea'i o le vevela | <0.03%FS/℃ |
| Fa'ailoga | Fa'ailoga galue laser: moli lanumeamata; Fa'ailoga o le ki o le galuega faatino: moli samasama |
| Matagaluega puipuiga | Puipuiga o le matagaluega pupuu, puipuiga o le polarity faafeagai, puipuiga o le soona mamafa |
| Galuega fa'apipi'i | Tuatusi pologa & fa'atulagaga o le fua faatatau o le Baud; Fa'atulagaga o le zero; Fesili fa'atapula'a; Su'esu'ega a le tagata lava ia o oloa; Fa'atulagaga o le gaosiga; A'oa'oga i le Ingle-point / a'oa'oga e lua-point / a'oa'oga e tolu-point; A'oa'oga fa'amalama; Toe setiina o fa'amatalaga falegaosimea |
| Siosiomaga tautua | Vevela o le fa'agaioiga:-10…+45℃; Vevela o le teuina:-20…+60℃; Vevela o le siosiomaga:35...85% RH (Leai se condensation) |
| Malamalama e tete'e i le siosiomaga | Moli susulu: <3,000lux; Fa'alavelave i le la: ≤10,000lux |
| Tipiloma puipuiga | IP65 |
| Meafaitino | Fale: U'amea fa'a'apamemea; Tioata: PMMA; Fa'ailoga: Tioata |
| Tete'e i le gatete | 10...55Hz Fa'aluaina le malosi 1mm, 2H ta'itasi i itu X, Y, Z |
| Tete'e i le fa'aosoosoga | 500m/s² (E tusa ma le 50G) 3 taimi i itu taʻitasi i le itu X,Y,Z |
| Feso'ota'iga | Uaea tu'ufa'atasi 2m (0.2mm²) |
| Mea fa'aopoopo | Sikulima M4 (umi: 35mm) x2, nati x2, gasket x2, fa'amau fa'apipi'i, tusi ta'iala fa'agaoioiga |
Tusi lau savali iinei ma lafo mai ia i matou
