Ho nepahala ho honyenyane 12V 24V DC RS485 digital laser displacement sensor PDE-CR400 series
> Sebaka se bohareng: 400mm
> Mefuta ea ho lekanya: 200mm
>Sekala se felletseng(FS):200-600mm
> Boima: 45mm * 27mm * 21mm
> Matla a phepelo: 12...24VDC
> Matla a sebelisoang: ≤960mW
>Qeto:100μm
> Ho nepahala ha mola: ± 0.2% FS(ho lekanya sebaka 200mm-400mm);
±0.3%FS(ho lekanya sebaka 400mm-600mm)
> ± Pheta ho nepahala:300μm@200mm-400mm;800μm@400mm(Kenyelletsa)-600mm
> Nako ea karabelo: <10ms
| RS-485 | Tlhaloso: PDE-CR400TGR |
| 4...20mA + 0-5V | Tlhaloso: PDE-CR400TGIU |
| Sebaka se bohareng | 400mm |
| Lekhalo la ho lekanya | ± 200mm |
| Sekala se felletseng(FS) | 200-600 limilimithara |
| Matla a phepelo | 12...24VDC |
| Tšebeliso ea matla | ≤960mW |
| Laola hona joale | ≤100mA |
| Ho theoha ha motlakase | <2V |
| Mohloli oa leseli | Laser e khubelu (650nm); Boemo ba Laser: Sehlopha sa 2 |
| Beam bophara | E ka ba Φ500μm(ka 400mm) |
| Qeto | 100μm |
| Ho nepahala ha mola | ± 0.2% FS(ho lekanya sebaka 200mm-400mm) ± 0.3% FS(ho lekanya sebaka 400mm-600mm) |
| Pheta ho nepahala | 300μm@200mm-400mm;800μm@400mm(Kenyelletsa)-600mm |
| Output 1(Khetho ea mohlala) | Boleng ba dijithale:RS-485(Support Modbus protocol);Boleng ba phetoho: NPN/PNP le NO/NC settable |
| Output 2(Khetho ea mohlala) | Analog: 4...20mA(Moroalo oa ho hanyetsa)/0-5V; Boleng ba phetoho: NPN/PNP le NO/NC settable |
| Boemo ba sebaka | RS-485:Keypress/RS-485 setting;Analoge:Ho tobetsa konopo |
| Nako ea ho arabela | <10ms |
| Boemo | 45mm*27mm*21mm |
| Pontšo | Pontšo ea OLED(Boholo:18*10mm) |
| Ho hoholeha ha mocheso | ℃0.03%FS/℃ |
| Sesupo | Letšoao la ho sebetsa la Laser: lebone le letala le butse; switjha sesupo sa tlhahiso: leseli le mosehla |
| Tšireletso potoloho | Ts'ireletso ea potoloho e khuts'oane, ts'ireletso ea reverse polarity, ts'ireletso ea moroalo o mongata |
| Mosebetsi o hahiloeng | Litlhophiso tsa liaterese tsa lekhoba le maemo a sekhahla sa Baud;Peakanyo ea Zero;Potso ea paramethara;Itlhahlobe ka sehlahisoa;Peakanyo ea sephetho;Thuto ea ntlha e le 'ngoe/thuto ea lintlha tse peli/thuto ea lintlha tse tharo;Ho ruta ka fensetere;Ho seta botjha data ka fekthering |
| Tikoloho ea litšebeletso | Mocheso oa tšebetso:-10…+45℃;Mocheso oa polokelo:-20…+60℃;Mocheso oa tikoloho:35...85%RH(Ha ho condensation) |
| Khanya e khahlanong le tikoloho | Leseli la incandescent:＜3,000lux; Tšitiso ea khanya ea letsatsi: ≤10,000lux |
| Digree tsa tshireletso | IP65 |
| Lintho tse bonahalang | Bolulo:Alloy ea Zinc;Lense:PMMA;Sets'oants'o:Khalase |
| Hanyetsa ho sisinyeha | 10...55Hz Double amplitude1mm, 2H e 'ngoe le e 'ngoe ho X,Y,Z litsela |
| Khahlanong le tšusumetso | 500m/s²(Hoo e ka bang 50G) makhetlo a 3 e 'ngoe le e 'ngoe ka litsela tsa X,Y,Z |
| Khokahano | 2m thapo e kopaneng (0.2mm²) |
| Sesebedisoa | M4 screw(bolelele:35mm)x2,nut x2,gasket x2,bracket e ntseng e hola, buka ea tšebetso |
Ngola molaetsa wa hao mona mme o re romele wona
