Sensor ea ho Falla ha Laser ea RS485 e bohlale ea 4 ho isa ho 20mA PDA-CR50TGI CMOS e nang le Sensor ea hole ea ho falla ha Laser 'Meleng oa Tšepe Setšoantšo se Hlahisitsoeng

Sensor ea ho Falla ha Laser ea RS485 e bohlale ea 4 ho isa ho 20mA PDA-CR50TGI CMOS ea ho Falla ha Laser ka 'Mele oa Tšepe

Tlhaloso e Khutšoanyane:

Sebaka sa ho lemoha sebaka se fihlang ho 85mm, le qeto e tlase ho fihla ho 2.5μm. Ntlo ea aluminium e bobebe, moralo oa ponahalo e bonolo, ts'ebetso e tsoetseng pele ea tekheniki, e tiileng ebile e tšoarella; sokete ea cable ea oblique ea 45°, e loketse litlhoko tse ling tsa ho kenya. Sebaka sa leseli sa bophara ba 0.5mm ho lekanya lintho tse nyane haholo ka nepo le ka mokhoa o tsitsitseng. Thupelo ea senotlolo kapa ea hole ho beha nako ea karabelo habonolo bakeng sa lits'ebetso tse fapaneng, tlhophiso e matla ea ts'ebetso le mokhoa o tenyetsehang oa tlhahiso, degin e sirelelitsoeng ka botlalo, ho ntlafatsa ts'ebetso ea ho thibela tšitiso. E kenyelelitsoe hantle ho tlatsa tekanyo ea ts'ireletso ea IP67, e khona ho sebetsa tikolohong e thata le e lerōle. Likhetho tse ngata tsa mekhoa ea tlhahiso le li-interface ho kopanya le ho bokella tlhahisoleseling habonolo bakeng sa lisebelisoa tsa PLC kapa tse laolang.

Romella imeile ho rona

Qaqiso ea Sehlahisoa

Khoasolla

Li-tag tsa Sehlahisoa

Tlhaloso

Sensor ea laser ea CMOS e bohlale e loketse litekanyo tse khutšoane, e nang le temoho e nepahetseng, ts'ebetso e tsitsitseng, ts'ebetso e akaretsang le e sebetsang hantle. Bokhoni ba ho lemoha bo nepahetseng ka lebaka la theknoloji e ikhethang. Ponahalo e ntle le ntlo e bobebe ea aluminium, e bonolo ho e kenya le ho e kenya
Phanele ea ts'ebetso e bonolo, e nang le ponts'o ea OLED e bonts'itsoeng ho phethela litlhophiso tsohle tsa ts'ebetso kapele, litharollo tse phethahetseng bakeng sa litlhoko tse fapaneng tse rarahaneng.

Likarolo tsa Sehlahisoa

> Ho lemoha tekanyo ea sebaka
> Sebaka sa ho lekanya: 30mm, 50mm, 85mm
> Boholo ba ntlo: 65*51*23mm
> Tharollo: hlahloba lintlha tse qaqileng leqepheng la data
> Matla a tshebediso: ≤700mW
> Sehlahiswa: RS-485 (Tšehetso ea Modbus protocol); 4...20mA (Khanyetso ea mojaro ＜390Ω)/PUSH-PULL/NPN/PNP 'me NO/NC Settable
> Mocheso o tloaelehileng: -10…+50℃
> Thepa ea Bolulo: Bolulo: Aluminium; Sekoahelo sa lense: PMMA; Phanele ea ponts'o: PC
> Tšireletso e felletseng ea potoloho: Potoloho e khutšoanyane, polarity e khutlelang morao, tšireletso ea ho jara boima bo feteletseng
> Tekanyo ea tšireletso: IP67
> Leseli le thibelang tikoloho: Leseli le hlabang: ＜3,000lux
> Li-sensor li na le likhoele tse sirelelitsoeng, terata Q ke sesebelisoa sa ho bulela.

Nomoro ea Karolo

Matlo a polasetiki
	E tloaelehileng	Ho nepahala ho hoholo	E tloaelehileng	Ho nepahala ho hoholo	E tloaelehileng	Ho nepahala ho hoholo
RS485	PDA-CR30DGR	PDA-CR30DGRM	PDA-CR50DGR	PDA-CR50DGRM	PDA-CR85DGR	PDA-CR85DGRM
4...20mA	PDA-CR30TGI	PDA-CR30TGIM	PDA-CR50TGI	PDA-CR50TGIM	PDA-CR85TGI	PDA-CR85TGIM
--	--	--	--	--	--	--
--	--	--	--	--	--	--
--	--	--	--	--	--	--
--	--	--	--	--	--	--
Litlhaloso tsa tekheniki
Mofuta oa ho lemoha	Ho lemoha ho falla ha laser
Sebaka se bohareng	30mm		50mm		85mm
Sebaka sa ho lekanya	± 5mm		± 15mm		± 25mm
Sekala se felletseng (FS)	10mm		30mm		50mm
Phepelo ea motlakase	RS-485:10...30VDC;4...20mA:12...24VDC
Matla a tšebeliso	≤700mW
Mojaro oa hona joale	200mA
Ho theoha ha motlakase	<2.5V
Mohloli oa leseli	Lese e khubelu (650nm); Boemo ba laser: Sehlopha sa 2
Sebaka se khanyang	Φ0.5mm@30mm		Φ0.5mm@50mm		Φ0.5mm@85mm
Qeto	2.5um@30mm		10um@50mm		30um@85mm
Ho nepahala ha mola	RS-485:±0.3%FS;4...20mA:±0.4%FS	± 0.1%FS	RS-485:±0.3%FS;4...20mA:±0.4%FS	± 0.1%FS	RS-485:±0.3%FS;4...20mA:±0.4%FS	± 0.1%FS
Ho nepahala ho pheta-pheta	5um		20um		60um
Sehlahisoa sa 1	RS-485 (Tšehetso ea Modbus protocol); 4...20mA (Khanyetso ea mojaro ＜390Ω)
Sehlahisoa sa 2	PUSH-HULL/NPN/PNP 'me NO/NC e ka hlophisoa
Sebaka se behiloeng	RS-485:Setlhophiso sa ho tobetsa konopo/RS-485; 4...20mA:Setlhophiso sa ho tobetsa konopo
Nako ea karabelo	2ms/16ms/40ms E ka hlophisoa
Litekanyo	655123mm
Pontšo	Pontšo ea OLED (boholo: 14 * 10.7mm)
Ho thella ha mocheso	±0.08%FS/℃		± 0.02%FS/℃		±0.04%FS/℃
Sesupo	Sesupo sa matla: LED e tala; Sesupo sa ketso: LED e mosehla; Sesupo sa alamo: LED e mosehla
Potoloho ea tšireletso	Potoloho e khutšoanyane, polarity e khutlelang morao, tšireletso ea ho jara boima bo feteletseng
Mosebetsi o kentsweng kahare	Setlhophiso sa Aterese ea Lekhoba le Sekhahla sa Kou; Setlhophiso se tloaelehileng; Tlhahlobo ea sehlahisoa; Litlhophiso tsa 'mapa oa analoge; Setlhophiso sa tlhahiso; Khutlisa litlhophiso tsa fektheri; Ruta ntlha e le 'ngoe; Ruta fensetere; Potso ea liparamente
Tikoloho ea litšebeletso	Mocheso oa ts'ebetso: -10…+50℃; Mocheso oa polokelo: -20…+70℃
Mocheso o tloaelehileng	35...85%RH(Ha ho na condensation)
Leseli le thibelang tikoloho	Leseli la incandescent: ＜3,000lux
Tekanyo ea tšireletso	IP67
Thepa	Ntlo: Aluminium; Sekoahelo sa lense: PMMA; Phanele ea ponts'o: PC
Khanyetso ea ho thothomela	10...55Hz Bophahamo bo habeli 1mm, 2H ka 'ngoe ka litsela tsa X, Y, Z
Khanyetso ea tšusumetso	500m/s²(Hoo e ka bang 50G) makhetlo a 3 ka 'ngoe ka litsela tsa X, Y, Z
Mofuta oa khokahano	Thapo ea RS-485:2m ea li-pin tse 5 tsa PVC;4...20mA:2m Thapo ea PVC ea lipin tse 4
Sesebelisoa	Sekuru (M4×35mm)×2、Nat×2、Washer×2、Sebakete sa ho kenya、Buka ya tshebetso