RS485 4 nwere ọgụgụ isi ruo 20mA PDA-CR50TGI CMOS Laser Displacement Distance Sensor N'ime ahụ igwe
Ihe mmetụta laser CMOS nwere ọgụgụ isi kacha mma maka nha anya dị mkpụmkpụ, yana nchọpụta ziri ezi, arụmọrụ kwụsiri ike, ọrụ zuru ụwa ọnụ na nke ọma.Ike nchọpụta ziri ezi ekele maka teknụzụ pụrụ iche.Ọdịdị mara mma na ụlọ aluminom dị ọkụ, dị mfe ịgbago na
dismount, panel arụmọrụ dabara adaba na ihe ngosi OLED a na-ahụ anya iji mezue ntọala ọrụ niile ngwa ngwa, azịza zuru oke maka ihe mgbagwoju anya dị iche iche.
> Nchọpụta nha anya
> Oke nha: 30mm, 50mm, 85mm
> Ọnụ ụlọ: 65*51*23mm
> Mkpebi: lelee nkọwa na akwụkwọ data
> Ike oriri: ≤700mW
> Mpụta: RS-485 (Nkwado Modbus protocol);4 ... 20mA (Ibu Ibu Nguzogide＜390Ω)/PUSH-PULL/NPN/PNP Na NO/NC Settable
> Ọnọdụ okpomọkụ: -10…+50 ℃
> Ihe ebe obibi: Ụlọ: Aluminom; mkpuchi oghere:PMMA; Ogwe ngosi: PC
> Nchedo sekit zuru oke: sekit dị mkpụmkpụ, polarity reverse, nchebe ibu
> ogo nchekwa: IP67
> Ìhè mgbochi ihere: Ìhè na-esi ísì:＜3,000lux
> Ihe mmetụta na-eji eriri mkpuchi kpuchie, waya Q bụ mmepụta mgbanwe.
| Ụlọ plastik | ||||||
| Ọkọlọtọ | Elu nkenke | Ọkọlọtọ | Elu nkenke | Ọkọlọtọ | Elu nkenke | |
| RS485 | PDA-CR30DGR | PDA-CR30DGRM | PDA-CR50DGR | PDA-CR50DGRM | PDA-CR85DGR | PDA-CR85DGRM |
| 4...20mA | PDA-CR30TGI | PDA-CR30TGIM | PDA-CR50TGI | PDA-CR50TGIM | PDA-CR85TGI | PDA-CR85TGIM |
| -- | -- | -- | -- | -- | -- | -- |
| -- | -- | -- | -- | -- | -- | -- |
| -- | -- | -- | -- | -- | -- | -- |
| -- | -- | -- | -- | -- | -- | -- |
| Nkọwa nka na ụzụ | ||||||
| Ụdị nchọpụta | Nchọpụta ọpụpụ laser | |||||
| Ogologo etiti | 30mm | 50mm | 85mm | |||
| Oke nha | ±5mm | ± 15mm | ± 25mm | |||
| Ọnụ ọgụgụ zuru oke (FS) | 10mm | 30mm | 50mm | |||
| voltaji ọkọnọ | RS-485:10...30VDC;4...20mA:12...24VDC | |||||
| Ike oriri | ≤700mW | |||||
| Ibu ibu ugbu a | 200mA | |||||
| Mbelata voltaji | <2.5V | |||||
| Isi iyi ọkụ | Laser na-acha uhie uhie (650nm); ọkwa laser: Klas 2 | |||||
| Ebe dị ọkụ | Φ0.5mm @ 30mm | Φ0.5mm @ 50mm | Φ0.5mm @ 85mm | |||
| Mkpebi | 2.5m @ 30mm | 10mm @ 50mm | 30mm @ 85mm | |||
| izi ezi nke ahịrị | RS-485:±0.3%FS;4...20mA:±0.4%FS | ±0.1% FS | RS-485:±0.3%FS;4...20mA:±0.4%FS | ±0.1% FS | RS-485:±0.3%FS;4...20mA:±0.4%FS | ±0.1% FS |
| Tinyegharịa izi ezi | 5um | 20um | 60um | |||
| Mpụta 1 | RS-485 (Nkwado Modbus protocol);4...20mA (nkwụsi ike ibu | 390Ω) | |||||
| Mpụta 2 | PUSH-PULL/NPN/PNP na NO/NC Settable | |||||
| Ntọala anya | RS-485: igodo igodo/RS-485 ntọala;4...20mA: Ntọala igodo | |||||
| Oge nzaghachi | 2ms/16ms/40ms Ntọala | |||||
| Akụkụ | 65*51*23mm | |||||
| Ngosipụta | Ngosipụta OLED (nha: 14*10.7mm) | |||||
| Okpomọkụ ịkpafu | ±0.08%FS/℃ | ±0.02%FS/℃ | ±0.04%FS/℃ | |||
| Ihe ngosi | Ngosipụta ike:Green LED;Ngosipụta omume:Ikanam edo edo;Oti mkpu: Ikanam edo edo | |||||
| sekit nchedo | Short sekit, reverse polarity, bufee nchebe | |||||
| Ọrụ arụnyere n'ime ya | Adreesị ohu & Ntọala ọnụego ọdụ ụgbọ mmiri ;Ntọala nkezi;Nlele onwe onye ngwaahịa;Ntọala map Analog; Ntọala mmepụta; Weghachite ntọala ụlọ ọrụ;nkuzi otu ihe;Nkuzi windo;ajụjụ oke | |||||
| gburugburu ọrụ | Okpomọkụ ọrụ:-10…+50℃;Okpomọkụ nchekwa:-20…+70℃ | |||||
| Ọnọdụ okpomọkụ | 35...85% RH (enweghị condensation) | |||||
| Ihe mgbochi ambient ìhè | Ọkụ ọkụ: 3,000lux | |||||
| Ọkwa nke nchebe | IP67 | |||||
| Ihe onwunwe | Ụlọ: Aluminom; mkpuchi oghere:PMMA; Ogwe ngosi: PC | |||||
| Nguzogide ịma jijiji | 10...55Hz Ugboro abụọ amplitude1mm,2H nke ọ bụla na X,Y,Z ntụziaka | |||||
| Nguzogide mkpali | 500m/s² (Ihe dị ka 50G) ugboro 3 ọ bụla na ntụzịaka X,Y,Z | |||||
| Ụdị njikọ | RS-485: 2m 5pins PVC cable; 4...20mA: 2m 4pins PVC cable | |||||
| Ngwa | Ịghasa (M4 × 35mm) × 2, Nut × 2, Washer × 2, arịọnụ nkwado, Ọrụ ntuziaka | |||||
LR-ZB100N igodo;ZX1-LD300A81 Omron
