Contact us: export_gl@shlanbao.cn
Usoro PDE nke ihe mmetụta mwepụ anya laser ngosi dijitalụ
Isi atụmatụ: obere nha, oke nkenke, ọtụtụ ọrụ, arụmọrụ dị elu
Obere nha, ụlọ aluminom, siri ike ma sie ike.
Ogwe ọrụ dị mfe nwere ngosipụta dijitalụ visua OLED, mezue ntọala ọrụ niile ngwa ngwa.
Ọkụ ọkụ dị obere nke 0.5mm, tụọ obere ihe nke ọma.
Izi ezi nke imeghachi ihe ruo 800um, na-enweta nchọpụta dị iche nke nzọụkwụ dị elu.
Ntọala ọrụ dị ike, ụzọ mmepụta na-agbanwe agbanwe.
Nhazi nchekwa zuru oke, arụmọrụ siri ike nke mgbochi nnyonye anya.
Ọkwa nchekwa IP65, a na-eji ya eme ihe n'ụzọ dị mfe na gburugburu ebe mmiri na uzuzu dị.
Nchedo atọ
Nchedo sekit dị mkpirikpi
Mgbe ibu ahụ gbawara agbawa, a na-echebe ngwaahịa na ibu ahụ ka ọ ghara ịgba ọkụ.
Nchedo polarity azụ
A gaghị agba ọkụ ngwaahịa ahụ mgbe e tụgharịrị ogidi dị mma na nke na-adịghị mma nke ike ọkụ ahụ.
Nchedo ibu oke ibu
Na-echebe onwe gị ozugbo mgbe ibu ahụ na-adịghị akwụsi ike ma ọ bụ mgbe ọkụ ahụ na-amụba, iji zere ọdịda ngwaahịa.
Ogwe ọrụ na ọrụ
Nhazi oge nzaghachiNtọala ebe esereseNtọala hysteresisNhazi nhazi uru dị mma
Ntọala ụzọ mmepụtaNtọala ọnọdụ nchọpụtaNtọala ntinye mpụgaNtọala paramita nkwukọrịta
Ọnọdụ ngwa
Nha nha elu sistemụ nkesa ziri ezi
Nha mgbanwe nke panel anyanwụ
Paramita nkọwapụta
| RS-485 | PDE-CR50TGR | PDE-CR100TGR | PDE-CR400TGR |
| 4...20mA + 0-5V | PDE-CR50TGIU | PDE-CR100TGIU | PDE-CR400TG |
| Anya etiti | 50mm 100mm 400mm |
| Oke nha | ±15mm ±35mm ±200mm |
| Ọnụọgụ zuru oke (FS) | 35-65mm 65-135mm 200-600mm |
| Voltaji ọkọnọ | 12...24VDC |
| Ike oriri | ≤960mW |
| Ibu ibu ugbu a | ≤100mA |
| Mbelata voltaji | <2V |
| Isi iyi ọkụ | Laser uhie (650nm); Ọkwa laser: Klas nke abụọ |
| Dayameta nke ogwe osisi | /Ihe dị ka Φ120μm (na 100mm)/Ihe dị ka Φ500μm (na 400mm) |
| Mkpebi | 10μm 100μm |
| Izi ezi kwụ ọtọ | ±0.1%FS / ±0.2%FS (anya nha 200mm-400mm); ±0.3%FS (anya nha 400mm-600mm) |
| Izi ezi ugboro ugboro | 30μm 70μm 300μm@200mm-400mm; 800μm@400mm (Gụnyere) - 600mm |
| Mbupụta 1 (Nhọrọ nlereanya) | Uru dijitalụ: RS-485 (Nkwado usoro Modbus); Gbanwee uru: NPN/PNP na NO/NC edobere |
| Mbupụta nke 2 (Nhọrọ nlereanya) | Analọg:4...20mA (Nguzogide ibu＜300Ω)/0-5V; Uru mgbanwe:NPN/PNP na NO/NC edobere |
| Ntọala anya | RS-485:Ntọala igodo/RS-485; Analog:Ntọala igodo |
| Oge nzaghachi | <10ms |
| Akụkụ | 45mm*27mm*21mm |
| Ngosipụta | Ngosipụta OLED (Nha: 18*10mm) |
| Mbugharị okpomọkụ | <0.03%FS/℃ |
| Ihe ngosi | Ihe ngosi ọrụ laser: ọkụ akwụkwọ ndụ na-agba; Ihe ngosi mmepụta mgbanwe: ọkụ odo |
| Sekit nchekwa | Nchedo sekit dị mkpụmkpụ, nchedo polarity azụ, nchedo ibu oke |
| Ọrụ arụnyere n'ime | Ntọala adreesị ohu na ntọala ọnụego Baud; Ntọala efu; Ajụjụ paramita; Nnyocha onwe onye nke ngwaahịa; Ntọala mmepụta; Nkuzi isi Ingle/nkuzi isi abụọ/nkuzi isi atọ; Nkuzi windo; Tọgharịa data ụlọ ọrụ |
| Gburugburu ọrụ | Okpomọkụ ọrụ:-10…+45℃;Okpomọkụ nchekwa:-20…+60℃;Okpomọkụ gburugburu:35...85%RH(Enweghị mmiri ozuzo) |
| Mgbochi ọkụ gburugburu | Ọkụ ọkụ na-enwu enwu:＜3,000lux; nnyonye anya anyanwụ:≤10,000lux |
| Ọkwa nchekwa | IP65 |
| ihe | Ụlọ: Zinc alloy; Lens:PMMA; Diaplay:Glass |
| Mgbochi ịma jijiji | 10...55Hz Oke okpukpu abụọ 1mm, 2H nke ọ bụla na ntụziaka X, Y, Z |
| Mgbochi mkpali | 500m/s² (Ihe dị ka 50G) ugboro atọ nke ọ bụla na ntụziaka X, Y, Z |
| njikọ | Eriri 2m nke mejupụtara (0.2mm²) |
| ngwa | Skru M4 (ogologo: 35mm) x2, aki x2, gasket x2, ihe nkwado nrụnye, akwụkwọ ntuziaka ọrụ |
Ajụjụ ndị ọzọ
Oge ozi: Mee-11-2024