ʻO ka pololei liʻiliʻi liʻiliʻi 12V 24V DC RS485 mīkini hoʻoneʻe laser kikohoʻe moʻo PDE-CR400
> mamao waena:400mm
> Ke ana ana: 200mm
>Pūnaewele piha(FS):200-600mm
> Ana: 45mm * 27mm * 21mm
> Puke uila: 12...24VDC
> Mana hoʻohana:≤960mW
> Hoʻoholo: 100μm
>Linear pololei:±0.2%FS(ana ana i ka mamao 200mm-400mm);
± 0.3%FS (ana ana 400mm-600mm)
>± E hana hou i ka pololei:300μm@200mm-400mm;800μm@400mm(Ho'okomo)-600mm
> Manawa pane:<10ms
| RS-485 | PDE-CR400TGR |
| 4...20mA + 0-5V | PDE-CR400TGIU |
| mamao waena | 400mm |
| Laulā ana | ± 200mm |
| Pihi piha (FS) | 200-600mm |
| Volta hoʻolako | 12...24VDC |
| Mana hoʻohana | ≤960mW |
| Hoʻouka i kēia manawa | ≤100mA |
| Haʻuleʻa uila | <2V |
| Puna māmā | Laser ʻulaʻula(650nm);Ka pae ʻulaʻula: Papa 2 |
| Anawaena kukuna | Ma kahi o Φ500μm (ma 400mm) |
| Olelo Hooholo | 100μm |
| pololei laina | ± 0.2%FS(ana ana ka mamao 200mm-400mm);±0.3%FS(ana ana 400mm-600mm) |
| E hana hou i ka pololei | 300μm@200mm-400mm;800μm@400mm(Hoʻokomo)-600mm |
| Hua'ōlelo 1 (koho hoʻohālike) | Waiwai kikohoʻe: RS-485(Kākoʻo Modbus protocol) ； Waiwai hoʻololi: NPN/PNP a me NO/NC hoʻonohonoho |
| Hua'ōlelo 2 (koho hoʻohālike) | Analog: 4...20mA(Ka hoʻopaʻa haʻahaʻa ＜300Ω)/0-5V; Waiwai hoʻololi: NPN/PNP a me NO/NC hoʻonohonoho |
| Hoʻonohonoho mamao | RS-485: Ke kaomi kī/RS-485; Analog: Ka hoʻonohonoho ʻana i ke kī kī |
| Manawa pane | <10ms |
| Anana | 45mm * 27mm * 21mm |
| Hōʻike | Hōʻike OLED (Laha: 18*10mm) |
| Ka neʻe ʻana o ka mahana | ＜0.03%FS/℃ |
| Hōʻike | Hōʻailona hana laser: ʻā ke kukui ʻōmaʻomaʻo; E hoʻololi i ka hōʻailona puka: kukui melemele |
| Kaapuni pale | Pale kaapuni pōkole, hoʻohuli polarity pale, overload pale |
| Hana ʻia i loko | ʻO ka helu kauā a me ka hoʻonohonoho ʻana i ka helu Baud; Hoʻonohonoho ʻaʻohe; Nīnau parameter; Nānā ponoʻī o ka huahana; Hoʻonohonoho ʻana i waho; Ke aʻo ʻana ma waena o ke aʻo ʻana/ke aʻo ʻelua-helu/ke aʻo ʻekolu-helu; Ke aʻo ʻana i ka puka makani; |
| Kaiapuni lawelawe | Ka wela hana:-10…+45℃;Panahana waihona:-20…+60℃;Ambient wela:35...85%RH(No condensation) |
| ʻAi i ke kukui ambient | Ke kukui uila: ＜3,000lux; Hoʻopilikia ka lā: ≤10,000lux |
| Degree pale | IP65 |
| Mea waiwai | Noho: Zinc alloy; Lens: PMMA; Diaplay: Glass |
| Kūʻē ka haʻalulu | 10...55Hz Amplitude pālua1mm,2H kēlā me kēia ma nā kuhikuhi X,Y,Z |
| Kūʻē kūʻē | 500m/s²(Ma kahi o 50G) 3 manawa i kēlā me kēia ma nā kuhikuhi X,Y,Z |
| Hoʻohui | 2m uwea huikau (0.2mm²) |
| Mea kōkua | M4 screw(lōʻihi:35mm)x2, nut x2, gasket x2, pale pale kau, manual hana |
E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou
