Contact us: export_gl@shlanbao.cn
Na'urar firikwensin nesa ta laser ta dijital jerin PDE
Babban fasali: ƙaramin girma, babban daidaito, ayyuka da yawa, ingantaccen aiki sosai
Ƙaramin girma, gidan aluminum, mai ƙarfi da dorewa.
Kwamitin aiki mai dacewa tare da nunin dijital na visua OLED, yana kammala duk saitunan aiki cikin sauri.
Tabo mai ƙaramin haske 0.5mm, auna ƙananan abubuwa daidai.
Daidaiton maimaitawa har zuwa 800um, cimma nasarar gano bambancin mataki mai zurfi.
Saitunan aiki masu ƙarfi, hanyoyin fitarwa masu sassauƙa.
Cikakken tsarin kariya, ƙarfin aikin hana tsangwama.
Matakin kariya na IP65, mai sauƙin amfani a cikin yanayi mai ruwa da ƙura.
Kariya sau uku
Kariyar gajeriyar da'ira
Idan nauyin ya yi ƙasa, za a kare samfurin da kayan daga ƙonewa.
Kariyar polarity ta baya
Samfurin ba zai ƙone ba idan aka juya sandunan wutar lantarki masu kyau da marasa kyau.
Kariyar lodi fiye da kima
Kariya ta atomatik lokacin da kaya ba shi da tabbas ko kuma ƙarfin lantarki ya ƙaru, don guje wa lalacewar samfur.
Kwamitin aiki da ayyuka
Saitin lokacin amsawaSaitin wurin zana taswiraSaitin HysteresisSaita daidaitaccen ƙimar daidaitawa
Saitin hanyoyin fitarwaSaitin yanayin jiSaitin shigarwar wajeSaitin sigar sadarwa
Yanayin aikace-aikace
Ma'aunin tsayin tsarin rarrabawa daidai
Ma'aunin nakasar na'urar hasken rana
Sigar ƙayyadewa
| RS-485 | PDE-CR50TGR | PDE-CR100TGR | PDE-CR400TGR |
| 4...20mA + 0-5V | PDE-CR50TGIU | PDE-CR100TGIU | PDE-CR400TG |
| Nisa ta tsakiya | 50mm 100mm 400mm |
| Kewayon aunawa | ±15mm ±35mm ±200mm |
| Cikakken sikelin (FS) | 35-65mm 65-135mm 200-600mm |
| Ƙarfin wutar lantarki | 12...24VDC |
| Ƙarfin amfani | ≤960mW |
| Load current | ≤100mA |
| Faduwar ƙarfin lantarki | <2V |
| Tushen haske | Laser ja (650nm); Matakin Laser: Aji na 2 |
| Diamita na katako | /Game da Φ120μm(a 100mm)/Game da Φ500μm(a 400mm) |
| ƙuduri | 10 μm 100 μm |
| Daidaiton layi | ±0.1%FS / ±0.2%FS (nisan aunawa 200mm-400mm); ±0.3%FS (nisan aunawa 400mm-600mm) |
| Daidaiton maimaitawa | 30μm 70μm 300μm@200mm-400mm; 800μm@400mm(Haɗa) - 600mm |
| Fitarwa 1 (Zaɓin samfuri) | Darajar dijital: RS-485 (Tallafawa yarjejeniyar Modbus)；Ƙimar canzawa: NPN/PNP da NO/NC da za a saita |
| Fitarwa ta 2 (Zaɓin samfuri) | Analog:4...20mA (Juriyar lodi＜300Ω)/0-5V; Ƙimar sauyawa: NPN/PNP da NO/NC da aka saita |
| Saitin nisa | RS-485:Saitin danna maɓalli/RS-485; Analog:Saitin danna maɓalli |
| Lokacin amsawa | <10ms |
| Girma | 45mm*27mm*21mm |
| Allon Nuni | Nunin OLED (Girman: 18*10mm) |
| Juyawar yanayin zafi | <0.03%FS/℃ |
| Mai nuna alama | Alamar aiki ta Laser: hasken kore a kunne; Alamar fitarwa ta Switch: hasken rawaya |
| Da'irar kariya | Kariyar da'ira ta gajere, kariyar polarity ta baya, kariyar wuce gona da iri |
| Aikin da aka gina a ciki | Saitunan adireshin bawa & saitunan ƙimar Baud; Saitin sifili; Tambayar ma'auni; Duba kai da samfur; Saitin fitarwa; Koyar da maki biyu/koyarwa maki uku; Koyar da taga; Sake saita bayanai na masana'anta |
| Yanayin sabis | Zafin aiki:-10…+45℃; Zafin ajiya:-20…+60℃; Zafin yanayi:35...85%RH(Babu danshi) |
| Hasken hana yanayi | Hasken da ke ƙonewa: ≤3,000lux; Tsangwamar hasken rana: ≤10,000lux |
| Matakin kariya | IP65 |
| Kayan Aiki | Gidaje: Zinc gami; Ruwan tabarau:PMMA; Diaplay: Gilashi |
| Juriyar girgiza | 10...55Hz Girman ninki biyu 1mm, 2H kowanne a cikin kwatancen X, Y, Z |
| Juriyar Sha'awar Sha'awa | 500m/s²(Kimanin 50G) sau 3 kowanne a cikin kwatancen X, Y, Z |
| Haɗi | Kebul mai haɗin kai 2m (0.2mm²) |
| Kayan haɗi | Sukurin M4 (tsawon: 35mm) x2, goro x2, gasket x2, maƙallin hawa, littafin aiki |
Ƙarin tambayoyi
Lokacin Saƙo: Mayu-11-2024