E tsamaisoa ke phetoho ea matla a lefats'e le lipakane tsa ho se nke lehlakore ha carbon, libeteri tse ncha tsa matla a lithium li hlahile e le mohloli oa mantlha oa matla a likoloi tsa motlakase, lisebelisoa tsa polokelo ea matla le lisebelisoa tse bohlale. E le ho arabela tlhokahalo e potlakileng ea 'maraka ea tlhahiso ea betri e sebetsang hantle, e sireletsehileng le e phahameng ka ho fetisisa, Shanghai Lanbao Sensing Technology Co., Ltd., e sebelisa lilemo tsa eona tse 27 tsa tsebo ea ho iketsetsa liindasteri, e fana ka litharollo tse bohlale bakeng sa tlhahiso ea betri ea lithium, e lebisang indasteri ho "Intelligent Manufacturing Future."
Ts'ebetso ea tlhahiso ea libeteri tsa lithium e rarahane, e koahelang mekhahlelo e meraro e meholo: e ka pele-pele (ho lokisetsa electrode), bohareng ba bohareng (cell synthesis), le morao-morao (ho theha le ho hlophisa). Mohato o mong le o mong o na le litlhoko tse phahameng haholo bakeng sa ho nepahala, ho sebetsa hantle le ho tsitsa. Moetso oa setso oa tlhahiso o tobane le mathata a latelang:
Tokiso e thata ea ho kheloha ha lintho: Ho kheloha ho tloaelehile ho etsahala nakong ea ho roala ha electrode le ho senya, ho ama ts'ebetso ea lisele tsa betri.
Ho nepahala ho fokolang: Ho lemoha ka letsoho liphoso tsa welding, taolo ea boemo ba mokelikeli, joalo-joalo, ha e sebetse hantle ebile e tloaetse ho hloloheloa tlhahlobo.
Likotsi tse phahameng tsa polokeho:Tlhokomelo ea nako ea sebele e hlokahalang bakeng sa ts'ebetso ea lisebelisoa libakeng tse phahameng tsa mocheso le tse nang le khatello e phahameng.
Litharollo tsa Lanbao:
Ka li-sensor tsa photoelectric, li-inductive sensors, li-capacitive sensors, li-laser tse fapaneng tsa ho falla, lisebelisoa tsa pono tsa 3D, le theknoloji ea IoT ea indasteri, re finyella:
Tokiso ea ho kheloha ha lintho: ± 0.2mm tekanyo e phahameng ea ho nepahala e tiisa ho lumellana ha lakane ea electrode.
Tlhahlobo ea welding: 1μm-boemo ba temoho ea bofokoli ka sekhahla sa ho sibolloa se fetileng sa <1%.
Tlhokomelo ea boemo ba mokelikeli: Ho se ikopanye le ultrasonic sensing ho thibela ho phalla ha electrolyte.
1.Ts'ebetso ea Pele-Bofelo: Tokiso ea Electrode
Tokiso ea Coater Deviation:Letoto la li-sensor tsa 3D line scanning le fetola botenya ba ho roala ka nako ea 'nete, ho thusa ho lemoha ka nepo boemo ba micron.
Ho Fumana Boemo ba Lintho tsa Mixer:Li-sensor tsa Ultrasonic / Teflon capacitive sensors li lekola boemo ba mokelikeli oa slurry ka nako ea nnete ho thibela ho tlala.
Slitter Control:Ka li-sensor tsa photoelectric tsa beam li lemoha ho nepahala ha makhasi a li-electrode ho fokotsa litšila tsa thepa.
 |  |
| 【CPD terata lekanya bophara ba sensor PDM/PDT ho lemoha letoto la tokiso ea ho kheloha】 | 【Sensor e susumetsang bakeng sa ho lemoha boemo ba mochini ka ontong ea mochini oa ho roala |
Mokhoa oa 2.Bohareng ba Bohareng: Synthesis ea Cell
Maqhubu/Lamination:Li-sensor tsa pene tse peli tsa sheet ultrasonic li thibela ho kopana ha li-electrode sheet, ho ntlafatsa haholo tlhahiso ea tlhahiso.
Tekolo ea Boemo ba Mochini oa Ente ea Mokelikeli:Li-sensor tsa capacitive tsa boemo ba liphaephe le li-sensor tsa photoelectric li netefatsa bophahamo bo nepahetseng ba ente ea mokelikeli.
Ho fumanwa ha Battery Material Discharge:Li-sensor tsa fiber optic li lemoha ka nepo ho beoa ha thepa.
3.Back-End Process: PACK Kopano
Tlhahlobo ea Welding e Khurumetsang:Lisensara tsa laser tsa 3D line scanning li supa bofokoli ba ho tjheseletsa ka lebelo la 400mm/s.
Ho Fumana Boemo ba Battery:Li-sensor tse nyane tsa photoelectric le li-sensor tsa Ultra-thin capacitive li fihlella ka nepo boemo ba betri mehala ea tlhahiso.
Ho Fumana Boemo ba Battery Case:Li-sensor tsa inductive tse lekantsoeng ka IP67 le li-sensor tsa photoelectric li fana ka tlhahlobo ea nako ea nnete ea ho fihla ha thepa.
 |  |
| 【Letoto la Sensor ea Photoelectric PSE-YC: Temoho ea Boemo ba Battery Case 】 | 【Ultra-thin CE05 Capacitive Sensor bakeng sa Tlhahlobo ea Tlhahiso ea Battery】 |
Nepahetseng e phahameng:Sensor ea phalliso ea laser e na le qeto e phahameng ea 1μm le ho nepahala ho hoholo ho 10μm, ho fihlela litlhoko tsa ts'ebetso ea boemo ba 50μm.
Botsitso bo matla:E ikamahanya le maemo a fapaneng a mocheso (-25 ° C ~ 70 ° C) le moralo o hananang le ho sisinyeha, o loketseng tikoloho e thata ea tlhahiso.
E bohlale:Theknoloji ea IO-Link e nolofalletsa khokahanyo ea data le ho aha mokhoa oa ho latella boleng ba dijithale.
Tšebeletso e Felletseng ea Bophelo Bohle:Karabelo ea lihora tse 7 × 24, khetho ea mohlala e ikhethileng le tšehetso ea kamora ho rekisa.
Litharollo tse ikhethileng:Lanbao e fana ka litharollo tse felletseng le tse tšepahalang tsa othomathike, ho kenyeletsoa li-sensor, lihokelo tsa indasteri, le lihlahisoa tsa I/O, ho rarolla mathata afe kapa afe a othomathike ao u tobanang le ona.
Nako ea poso: May-28-2025