Taxanaha LANBAO PDE wuxuu bixiyaa is haysta, saxnaanta cabbiraadda barakicinta saxda ah ee ku habboon baytariga lithium, sawir-qaadista, iyo warshadaha 3C. Cabbirkeeda yar, saxnaanta sare, hawlaha badan, iyo nashqada isticmaale-saaxiibtinimo ayaa ka dhigaysa doorashada go'aan qaadashada cabbirada la isku halayn karo ee goobaha shaqada ee kala duwan.
Tilmaamaha Alaabta PDE
- Cabbir aad u is haysta, guri bir ah, adag oo waara.
- Guddi hawleedka isticmaale-saaxiibtinimo leh oo leh muuqaal dhijitaal ah oo OLED ah oo dareen leh oo loogu talagalay dejinta hawlqabad degdeg ah.
- Bar dhexroor 0.5mm ah oo qumman oo cabbirka saxda ah ee walxaha aadka u yaryar.
- Ku celcelinta sida ugu hooseysa 10um ee cabbiraadda dhererka saxda ah ee saxda ah.
- Dejinta shaqada xoogga leh iyo fursadaha wax soo saarka dabacsan.
- Naqshad gaashaan oo dhammaystiran oo loogu talagalay awoodda ka-hortagga faragelinta la xoojiyey.
| Wax soo saarka Analog | PDE-CR30TGIU | PDE-CR50TGIU | PDE-CR100TGIU | PDE-CR200TGIU | PDE-CR400 DGIU |
| RS-485 wax soo saarka | PDE-CR30TGR | PDE-CR50TGR | PDE-CR100TGR | PDE-CR200TGR | PDE-CR400 DGR |
| Masaafada dhexe | 30mm | 50mm | 100mm | 200mm | 400mm |
| Qiyaasta kala duwan | 25-35mm | 30-65mm | 65-135mm | 120-280mm | 200-600mm |
| Miisaanka buuxa (FS) | 10mm | 30mm | 70mm | 200mm | 400mm |
| danab sahayda | 12...24VDC | ||||
| Awooda isticmaalka | ≤850mW | ||||
| Ku shub hadda | ≤100mA | ||||
| Hoos u dhaca korantada | <2V | ||||
| Isha iftiinka | Laysarka cas (650nm); Laydhka leysarka: Fasalka 2 | ||||
| Cabbirka barta iftiinka | Φ50μm (30mm) | Φ70μm (50mm) | Φ120μm (100mm) | Φ300μm (200mm) | Φ500μm (400mm) |
| Qaraarka | 1μm | 10μm@50mm | 10μm@600mm | 100μm | 100μm |
| Saxnaanta toosan①② | ± 0.1% FS | ± 0.1% FS | ± 0.1% FS | ± 0.2% FS | ± 0.2% FS (Cabirka masaafada: 200mm ~ 400mm) ± 0.3%FS (qiyaasta masaafada: 400mm ~ 600mm) |
| Saxnaanta soo noqnoqda①②③ | 30um | 30um | 70um | 30um | 300u m@200mm ~ 400mm 800um@400mm(含)～600mm |
| wax soo saarka 1 Analog saarka | 4...20mA/0-5V Dejinta | ||||
| wax soo saarka 1 RS-485 Soo saarista | RS485 Taageerada ModBus borotokal | ||||
| Wax soo saarka2 | Bedelka qiimaha: NPN/PNP iyo NO/NC Dejin | ||||
| Wax soo saarka Analog | Dejinta furaha furaha | ||||
| RS-485 wax soo saarka | Dejinta Isgaarsiinta/ Keypress | ||||
| Waqtiga jawaabta | 10ms | ||||
| Cabirka | 45mm*27mm*21mm | ||||
| Bandhig | Muujinta OLED (Xajmiga: 18*10mm) | ||||
| Heerkulka leexleexan | ＜0.03%FS/℃ | ||||
| Tilmaame | Tilmaamaha hawlgalka laser: Cagaar, tilmaame wax soo saarka dhijitaalka ah: Jaalle | ||||
| Wareegga ilaalinta④ | Wareeg gaaban, dabarka gadaale, ilaalinta xad dhaafka ah | ||||
| Hawsha la dhisayo⑤ | Ciwaanka Addoonka & Dejinta Qiimaynta Baud Dejinta Qiimaha Celceliska ; Bar Hal Dhibic ah / Bar Bar Qaybeed / Saddex Dhibic Bar ;Bar Daaqad | ||||
| Deegaanka adeegga | Heerkulka hawlgalka: -10.....+45℃；Heerkulka kaydinta: -20....+60℃；Heerkulka deegaanka:35...85%RH(ma laha uumi) | ||||
| Iftiinka ambient-ka-hortagga ah | Iftiinka gubanaya ≤10,000 lux | ||||
| shahaadada ilaalinta | IP65 | ||||
| Qalab | Guriyeynta: Daawaha Zinc; Daboolka muraayadaha:PMMA; Bandhiga: Muraayadaha | ||||
| Gariir u adkaysta | 10.....55Hz dual amplitude 1.0mm,2 saac midkiiba jihada X,Y,Z | ||||
| Xoog u adkaysta | 500m/s2 (qiyaastii 50G) 3 jeer midkiiba jihada X,Y,Z | ||||
| Habka isku xirka | 0.2mm2 5-core cable 2m | ||||
| Agabka | fur (M4 × 35mm) × 2, Nut × 2, Washer × 2, dhejinta bracket, Buugga hawlgalka | ||||
Odhaah:
Shuruudaha Imtixaanka: Xogta caadiga ah ee 23 ± 5 ℃; Korontada sahayda 24VDC; diilinta 30 daqiiqo kahor tijaabada; Muddada muunada 2ms; Celcelis ahaan muunad 100;
Shayga Dareemaha caadiga ah 90％ kaadhka cad.
②Xogta tirakoobka waxay raacdaa shuruudaha 3σ.
Ku celi saxnaanta: 23 ± 5 ℃ deegaanka, 90% kaarka cad ee milicsiga, 100 natiijooyinka xogta tijaabada.
⑤ Ilaalinta wareegga kaliya ee soo saarista beddelka.
④ Cinwaanka addoonka, dejinta heerka baud kaliya ee taxanaha RS-485.
⑥ Si aad u hesho tillaabooyinka hawlgalka badeecada oo faahfaahsan iyo taxaddar, fadlan tixraac "Buugga Hawlgalka"
⑦ Xogtan waa qiimaha masaafada xarunta cabbirka.
- Warshadaha Aasaasiga ah:
- 3C elektarooniga ah, baytariyada lithium, automation makaanik, kulan caqli leh, photovoltaics, semiconductors, iwm.
- Goobaha Codsiga:
- La socodka wakhtiga dhabta ah ee khadadka wax soo saarka, ogaanshaha fidsanaanta, ogaanshaha dhumucda qayb ka mid ah, ogaanshaha dhererka is dulsaarka, meelaynta saxaaradda doonta quartz, joogitaanka/meelaynta ogaanshaha alaabta, iwm.
Waqtiga boostada: Jan-20-2025