Jikin Murabba'i RS485 4 zuwa 20mA NPN/PNP PDB-CR50DGR Na'urar Firikwensin Wayo Mai Lantarki Mai Lantarki
Na'urar firikwensin gano nesa, mai kama da mai laushi amma mai ƙarfi da ɗorewa, ƙirar filastik mai sauƙi tare da kayan kariya daga ruwa mai kyau. Bisa ga ka'idar dabarun CMOS, tana samar da mafita masu kyau don ganowa da aunawa daidai da kwanciyar hankali. Tare da ayyuka iri-iri da aka gina a ciki, mai sauƙin amfani ga masu aiki da ƙungiyar injiniya, mai sassauƙa don biyan buƙatu daban-daban. Nunin OLED da aka gani don yin duk saitunan aiki cikin sauri.
> Gano ma'aunin ƙaura
> Kewayon aunawa: 30mm, 50mm, 85mm
> Girman gidaje: 65*51*23mm
> ƙuduri: 10um@50mm
> Ƙarfin amfani: ≤700mW
> Fitarwa: RS-485 (Tallafawa yarjejeniyar Modbus); 4...20mA (Juriyar lodin kaya＜390Ω)/PUSH-PULL/NPN/PNP Da NO/NC An saita
> Yanayin zafi: -10…+50℃
> Kayan gida: Gidaje: ABS; Murfin ruwan tabarau:PMMA
> Cikakken kariyar da'ira: Gajeren da'ira, juyi polarity, kariya daga wuce gona da iri
> Digiri na kariya: IP67
> Hasken da ba ya haifar da yanayi: Hasken da ke haifar da yanayi:＜3,000lux
> Na'urorin firikwensin suna da kebul masu kariya, waya Q ita ce fitowar maɓalli.
| Gidajen Roba | ||
| Daidaitacce | ||
| RS485 | PDB-CR50DGR | |
| 4...20mA | PDB-CR50TGI | |
| Bayanan fasaha | ||
| Nau'in ganowa | Gano canjin laser | |
| Nisa ta tsakiya | 50mm | |
| Kewayon aunawa | ±15mm | |
| Cikakken sikelin (FS) | 30mm | |
| Ƙarfin wutar lantarki | RS-485:10...30VDC;4...20mA:12...24VDC | |
| Ƙarfin amfani | ≤700mW | |
| Load current | 200mA | |
| Faduwar ƙarfin lantarki | <2.5V | |
| Tushen haske | Laser ja (650nm); Matakin Laser: Aji na 2 | |
| Hasken haske | Φ0.5mm@50mm | |
| ƙuduri | 10um@50mm | |
| Daidaiton layi | RS-485:±0.3%FS;4...20mA:±0.4%FS | |
| Daidaiton maimaitawa | 20um | |
| Fitarwa 1 | RS-485 (Tallafawa yarjejeniyar Modbus); 4...20mA (Juriyar lodi＜390Ω) | |
| Fitarwa ta 2 | PUSH-PULL/NPN/PNP Da NO/NC Za a iya saita su | |
| Saitin nisa | RS-485:Saitin danna maɓalli/RS-485; 4...20mA:Saitin danna maɓalli | |
| Lokacin amsawa | Ana iya saita 2ms/16ms/40ms | |
| Girma | 65*51*23mm | |
| Allon Nuni | Nunin OLED (girman: 14*10.7mm) | |
| Juyawar yanayin zafi | ±0.02%FS/℃ | |
| Mai nuna alama | Alamar wuta: Koren LED; Alamar aiki: Rawaya LED; Alamar ƙararrawa: Rawaya LED | |
| Da'irar kariya | Da'ira mai gajere, polarity na baya, kariyar lodi | |
| Aikin da aka gina a ciki | Saitin adireshin bawa da ƙimar tashar jiragen ruwa; Matsakaicin saiti; Duba kai na samfur; Saitunan taswirar analog; Saitin fitarwa; Maido da saitunan masana'anta; Koyar da maki ɗaya; Koyar da taga; Tambayar sigina | |
| Yanayin sabis | Zafin aiki: -10…+50℃; Zafin ajiya:-20…+70℃ | |
| Yanayin zafi na yanayi | 35...85%RH(Babu danshi) | |
| Hasken hana yanayi | Hasken Incandescent: ≤3,000lux | |
| Matakin kariya | IP67 | |
| Kayan Aiki | Gidaje: ABS; Murfin ruwan tabarau:PMMA | |
| Juriyar girgiza | 10...55Hz Girman ninki biyu 1mm, 2H kowanne a cikin kwatancen X, Y, Z | |
| Juriyar sha'awa | 500m/s²(Kimanin 50G) sau 3 kowanne a cikin kwatancen X, Y, Z | |
| Nau'in haɗi | Kebul na PVC mai fil 5 na RS-485:2m; 4...20mA:2m Kebul na PVC mai fil 4 | |
| Kayan haɗi | Sukurori (M4×35mm) × 2, Goro×2, Wanke-wanke×2, Maƙallin hawa, Littafin aiki | |
